Dubbing only desired scenes – Digital program editing
(4) Confirming the VCR operation
1 Insert a recordable tape into the VCR, then set the VCR to recording pause.
2 Select IR TEST, then press EXEC.
3 Select EXECUTE, then press EXEC.
3
OTHERS
ED I T SET
When the VCR does not operate correctly
•Set the IR SETUP code, or select the button to cancel the recording pause on the VCR.
•Set your camcorder and the VCR about 11 7/8 in. (30cm) apart.
•Refer to the operating instructions of your VCR.
64
If the VCR starts recording, the setting is correct.
The indicator you selected to cancel recording pause on the VCR flashes on the
LCD screen. When finished, the indicator changes to "COMPLETE".
EXIT
CONTROL
ADJ TEST
"CUT - I N"
ENGAGE
"CUT -OUT"
REC PAUSE
I R SETUP
PAUSEMODE
RETURN
I R TEST
EXECUTE
EXEC
RET.
EXIT
OTHERS
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
COMPLETE
EXEC
RET.