Electrical Wiring Scheme - ROSIERES RGM9095IN User Manual

Free standing oven, 90x60 gas & electrical oven
Table of Contents

Advertisement

Available languages

Available languages

diameter of the flexible hose, which the natural hose nozzle is connect-
ed, should be 15mm.The hose should tightly be fitted to the hose nozzle
by squeezing with a clamp. The hose should be replaced before its last
expiry date.
8. Caution! Make the oven connection to the gas inlet valve, the hose
length must be short and be sure that there is no leakage. The flexible
hose used should not be longer than 125 cm for safety.
9. RE-INSPECT THE GAS CONNECTION.
10. When placing your oven to its location, ensure that it is at the coun-
ter level. Bring it to the counter level by adjusting the feet if necessary.
DO NOT MAKE GAS HOSE and ELECTRICAL CABLE OF YOUR OVEN GO THROUGH
THE HEATED AREAS, ESPECIALLY THROUGH THE REAR SIDE OF THE OVEN. DO
NOT MOVE GAS CONNECTED OVEN. SINCE THE FORCING SHALL LOOSEN THE
HOSE, GAS LEAKAGE MAY OCCUR.

ELECTRICAL WIRING SCHEME

FUSE SWITCH (25A/40A)
CONSUMER UNIT
3x4mm²
3x4mm²
JUNCTION BOX
610mm
220-240V~50/60Hz
Neutral
Neutre
Live
Earth
Phase
Terre
Erdung
H05 VV-F 3G 4mm² H05 VV-F 5G 1.5mm² H05 VV-F 4G 1.5mm² H05 VV-F 3G 1.5mm²
GB
400V 3N~50/60Hz
400V 2N~50/60Hz
L3
L2
Neutral
Neutre
L2
Earth
L1
L1
Terre
Erdung
9
220-240V~50/60Hz
Neutral
L1
Neutral
Neutre
Neutre
Earth
Earth
Terre
Terre
Erdung
Erdung

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents