Cleaning And Maintenance Of The Oven's Front Door Glass; Changing The Oven Lamp - ROSIERES RGM9095IN User Manual

CLEANING AND MAINTENANCE OF THE OVEN'S FRONT DOOR GLASS

Remove the profile by pressing the plastic latches on both left and right
sides as shown in Figure 20 and pulling the profile towards yourself as
shown in Figure 21 Then remove the inner-glass as shown in Figure 22
If required, middle glass can be removed in the same way. After cleaning
and maintenance are done, remount the glasses and the profile in reverse
order.Make sure the profile is properly seated in its place.
Figure 20

CHANGING THE OVEN LAMP

In order to avoid the possibility of an electric shock, ensure that the cir-
cuit of the appliance is open before changing the lamp. (The open-circuit
is an electrical circuit that does not conduct
current.)
1- First of all, cut the electrical connection of
the appliance and ensure that the appliance is
cooled down.
2- Remove the glass protection by turning as
shown in the figure. If you have difficulty in
turning it, the use of plastic gloves will help you.
3- Afterwards, remove the lamp by turning and
install the new lamp with the same specifica-
tions. The specifications of the lamp should be
as follows:
- 230 V, AC, 15 W, Type E14
4- Place the glass protection and complete
the replacing process by plugging in the electric
cable of the appliance. Now, you can use your
oven.
GB
Figure 22
20
Figure 21
Figure 23
Figure 24