Description Of The Control Panels; Using The Burner Groups - ROSIERES RGM9095IN User Manual

DESCRIPTION OF THE CONTROL PANELS

USING THE BURNER GROUPS

1. Closed
2. Our gas ovens top and bottom burner working system is one by one.
When you want use your preference burner, before you must make press
the tap knob and wait nearly 5-10 second. Then you can to inflame
through with automatic ignition system (optional) or match. You must
wait 10-15 second after inflame to have press by tap knob and after you
can make allow the knob. If you can not made this operation you must
try again.
3. The cocks controlling the gas cookers have special mechanism. In
order to light the cooker;
4. Always press on the switch forward and bring it to flame symbol by
turning anticlockwise (left). All of the lighters shall operate and the cook-
er you controlled shall light only. Keep the switch pressed until ignition is
performed. (OPTIONAL)
5. If your oven has ignition system from push button switch please press
and turn gas valve open position and same time press ignition button.
6. In models with security system, when flame of the cooker is extin-
guished, control valve cuts off the gas automatically. For operate the
burners with gas security system you must make press the knob and turn
antilock wise. After the ignition (with optional automatic ignition system
or match) you must wait nearly 5-10 second for gas security systems
activation.
7. Do not continuously operate the igniter for more than 15 seconds. After
15 seconds, if the burner does not ignite, then stop and if you are trying to
ignite the oven then open the door and wait a minimum of one minute before
trying again. If the burner is extinguished for of the any reason, close the gas
control valve and wait a minimum of one minute before trying again.
8. Before operating your hob please make sure that the burner caps are
Fully open
GB
Half open
15