well positioned. The right placement of the burner caps are shown as
below.
Figure 8
WOK Burner
Big Burner
Normal Burner
Small Burner
INSTALLATION OF THE OVEN FEET
In order to install the oven feet;
1.Foot attachment lath is installed on the oven from the bottom of the
oven as shown in (Figure 10).Nuts are centered on these lathes in order
to screw feet. Complete the feet installation process by screwing the feet
to the nuts (Figure 11).
2.You can balance your oven by turning the screwed feet according to
the surface type you are using.
3.If your oven has plastic food as in (Figure 12) you can adjust your
ovens height from these feet as turned clockwise or anticlockwise.
Figure 10
24-28cm
22-26cm
18-22cm
12-18cm
False
GB
False
Figure 11
16
Figure 9
False
True
Figure 12