Editing; Dubbing A Tape - Sony Handycam DCR-PC100 Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
Set the input selector on the VCR to LINE, if available.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Set the input selector on the VCR to LINE. For details, refer to the operating
(3) Set the POWER switch to VTR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. For details, refer to the operating instructions of
AUDIO/VIDEO
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Before a dubbing
Set DISPLAY to LCD in the menu settings. (Default setting is LCD.)
Be sure to clear the indicators from the screen
If they are displayed, press the following buttons not to record the indicators on the
dubbed tape:
• The DISPLAY button
• The DATA CODE button on the Remote Commander
• The SEARCH MODE button on the Remote Commander
You can edit on VCRs that support the following systems
8 mm,
Betamax,
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. When the white
plug is connected, the left channel audio is output, and the red plug is connected, the
right channel audio is output.
54
the recorded tape into your camcorder.
instructions of the VCR.
the VCR.
S VIDEO
Hi8, Digital8,
ED Betamax,
IN
VHS, S-VHS,
mini DV or DV
S VIDEO
VIDEO
AUDIO
VHSC, S-VHSC,