Connecting To A Wall Outlet - Sony Handycam DCR-PC100 Operating Instructions Manual

Step 1 Preparing the power supply

Connecting to a wall outlet

When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1) Open the DC IN jack cover, pulling the cover out a little. Connect the AC
power adaptor to the DC IN jack on your camcorder with the plug's v mark
facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
1
Notes
•The power cord must only be changed at an authorized service shop.
•The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
•AC power adaptor can supply power even if the battery pack is attached to your
camcorder.
•The DC IN jack has "source priority." This means that the battery pack cannot supply
any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.
Using a car battery
Use Sony DC Adaptor/Charger (not supplied).
2,3
13