Sony Handycam DCR-PC100 Operating Instructions Manual page 53

Searching for a photo – Photo search/Photo scan
Searching for a photo without using cassette memory
(1) Set the POWER switch to VTR.
(2) Set CM SEARCH in
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
search indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t no indicator
(4) Press . or > on the Remote Commander to select the photo for playback.
Each time you press . or >, your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
To stop searching
Press x.
Scanning photo
(1) Set the POWER switch to VTR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
scan indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
t no indicator
(3) Press . or > on the Remote Commander.
Each photo is played back for about five seconds automatically.
1
POWER
To stop scanning
Press x.
to OFF in the menu settings (p. 76).
2
SEARCH
MODE
3
PHOTO 00
SCAN
53