Using The Zoom Feature - Sony Handycam DCR-PC100 Operating Instructions Manual

Recording a picture

Using the zoom feature

Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom.
Using the zoom function sparingly results in better-looking recordings.
"T" side: for telephoto (subject appears closer)
"W" side: for wide-angle (subject appears farther away)
Zoom greater than 10 is performed digitally, if you set D ZOOM to ON in the menu
settings. The digital zoom function is set to OFF as a default setting (p. 76).
The right-ended portion of the
bar shows the digital zooming
zone.
The digital zooming zone appears
when you set D ZOOM to ON.
When you shoot close to a subject
If you cannot get a sharp focus, move the power zoom lever to the "W" side until the
focus is sharp. You can shoot a subject that is at least about 2 feet 5/8 inch (about 80 cm)
away from the lens surface in the telephoto position, or about 1/2 inch (about 1 cm)
away in the wide-angle position.
Notes on digital zoom
•Digital zoom starts to function when zoom exceeds 10 .
•The picture quality deteriorates as you move the power zoom lever toward the "T"
side.
•You cannot use the digital zoom when the POWER switch is set to MEMORY.
W T
W
T
W
T
W
T
19