11.12
Installing the lower triple clamp
(HERLINGS REPLICA, FACTORY EDITION)
–
Open cable holder
harness.
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and
place to one side.
Info
F01833-10
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove O-ring
–
Remove protective ring
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
F01560-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
S02307-10
SERVICE WORK ON THE CHASSIS 11
1
on the left and detach the wiring
2
.
3
.
4
.
5
.
p. 152)
1
2
3
and O-ring
is correctly posi-
.
59