Installing The Fork Legs - KTM 450 SX-F 2019 Owner's Manual

11.10

Installing the fork legs

(All SX‑F standard models, XC‑F US)
–
Loosen screws
–
Loosen screws
F01559-10
(HERLINGS REPLICA, FACTORY EDITION)
–
Loosen screws
–
Loosen screws
F01832-10
Main work
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
H01182-10
be flush with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
(All SX‑F standard models, XC‑F US)
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom
F01559-11
triple clamp
SERVICE WORK ON THE CHASSIS 11
3
. Take out the left fork leg.
4
. Take out the right fork leg.
3
. Take out the left fork leg.
4
. Take out the right fork leg.
1
of the right fork leg is positioned to
of the left fork leg faces the front.
2
.
M8
3
.
M8
17 Nm
(12.5 lbf ft)
12 Nm (8.9 lbf ft)
57