Removing The Fork Protector; Installing The Fork Protector; Removing The Engine Guard (Herlings Replica, Factory Edition) - KTM 450 SX-F 2019 Owner's Manual

11.5

Removing the fork protector

11.6

Installing the fork protector

11.7

Removing the engine guard (HERLINGS REPLICA, FACTORY EDITION)

Universal oil spray (
–
Press the dust boots back into their installation position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
–
Remove screws
S01208-10
–
Position the fork protection on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
S01208-11
tighten screws
Guideline
Remaining screws,
chassis
–
Remove screws
K01029-10
SERVICE WORK ON THE CHASSIS 11
p. 153)
p. 55)
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
1
.
M6 10 Nm (7.4 lbf ft)
3
.
M6 10 Nm (7.4 lbf ft)
1
.
p. 53)
55