13 WHEELS, TIRES
13.3
104
S01633-10
F00141-11
Removing the rear wheel
V00296-10
–
Align the brake disc guard so that distance
equal in size.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Operate the hand brake lever several times until the brake lin-
ings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
3
Tighten screws
.
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Manually press the brake caliper toward the brake disc to push
back the brake piston.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake piston.
–
1
Remove nut
.
–
2
Take off chain adjuster
enough to allow the rear wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove the
chain from the rear sprocket.
Info
Cover the components to protect them against damage.
B
and
2
.
M20x1.5
35 Nm (25.8 lbf ft)
p. 53)
M8
15 Nm (11.1 lbf ft)
p. 53)
. Only pull out wheel spindle
C
are
3
far