Table of Contents
Advertisement
2.1 DEScrIPTION
The Gledhill GB35C is a fully automatic, wall mounted gas fired, high efficiency
condensing combination boiler (Figure .1). It is a room sealed fan assisted
appliance and suitable for sealed central heating system and mains pressure
domestic hot water only. The maximum outputs of the boiler are: -
For central heating: 6.0 kW (Condensing) / 8.9kW (Non-Condensing)
For domestic hot water: 35.6 kW
It is designed for use on Natural Gas (G0), and governed meter supply only. It
is only suitable for use on fully pumped sealed heating systems and the controls
give priority to domestic hot water. The boiler is supplied with a filing loop and
a central heating programmer.
The boiler must be installed with one of the purpose designed Gledhill flue
systems such as the standard balanced flue kit part no GT461. Various flue
extensions, bends, vertical flue kits and plume management kits are available
as optional extras. These are detailed in a separate manual.
The boiler data badge gives details of the model, serial number, thermal data
and the Gas Council number and is situated on the inner door panel. It is visible
when the front panel is removed. The unique boiler model is shown on the
front case panel and the serial number is shown on the information label on
the bottom right hand side inner panel (Figure .1).
TEcHNIcAL INFOrMATION
2.0
Figure 2.1
Page 7
Data Badge -
On inner panel
behind front
case panel
Serial Number
Name and
Model
Advertisement
Table of Contents
