Siemens SIMATIC FM 452 Manual page 92

Machine Data and Cam Data
Address Name
95.0 EN_IN_I3
.. ..
.. ..
95.7 EN_IN_I10
A track signal Q3 to Q10 is activated in the following situation:
the track is enabled with TRACK_EN and
the appropriate external enable input I3 to I10 is set and
the track result of the track is 1.
Address Name
99.0 SPEC_TRC0
99.1 SPEC_TRC1
99.2 SPEC_TRC2
You can set tracks 0, 1 and 2 as special tracks.
Address Name
100.0 CNT_LIM0
104.0 CNT_LIM1
With this machine data, you specify the upper counter value for the set counter cam track.
8-24
Type Initial Value
Enable input:
BOOL FALSE 1 = track signal track 3 is ANDed with enable input
I3
.. ..
..
.. ..
1 = track signal track 10 is ANDed with enable
BOOL FALSE
input I10
Type Initial Value
Special tracks:
BOOL FALSE 1 = track 0 is counter cam track
BOOL FALSE 1 = track 1 is counter cam track
BOOL FALSE 1 = track 2 is brake cam track
Type Initial Value
DINT L#2 Upper counter value counter cam track (track 0)
DINT L#2 Upper counter value counter cam track(track 1)
Range:
2 ... 65535
Comment
Comment
Comment
FM 452 Electronic Cam Controller
C79000-G7076-C452-04