5.8.10 Output Of Analogue Values - EWM RINT X12 Operating Instructions Manual

Design and function
Process signals

5.8.10 Output of analogue values

For the output of welding voltage and welding current, the RINT X12 has two analogue outputs as follows:
Output Parameter
X11/1 Welding voltage
X11/3 Welding current
The analogue output signals are updated with an average time constant of approx. 40 ms and are
only used for display purposes. For faster signal processing, the signals of the interface for
mechanised welding can be used!
28
Standardisation
0..10 V equivalent to 0 to 100 V
process voltage
0..10 V equivalent to 0 to 1000 A
process current of the main arc
099-000769-EW501
29.06.2015