Chosing The Process Logic; Program Operation - EWM RINT X12 Operating Instructions Manual

5.7

Chosing the process logic

The respective welding characteristic curve is set via job control. For setting of working points the
RINT X12 offers two different possibilities for control.
5.7.1

Program operation

Every job contains 15 different working points, whichcan be directly set via four digital signals. The
parameters of the working points can be modified with a control panel or more comfortable by using the
parameter software PC300.NET.
In program mode, the following parameters are assigned to each working point:
Process
MIG/MAG
TIG
Plasma
1)
Only in systems with automatic gas regulating valves.
099-000769-EW501
29.06.2015
System type Parameter
Phoenix / Wire speed, arc length correction, dynamic correction, operating
alpha Q mode and welding type
Tetrix / forceTig Welding current, cold wire speed, operating mode and welding type
Tetrix / forceTig Welding current, cold wire speed, shielding gas
operating mode and welding type
Design and function
Chosing the process logic
1)
, plasma gas
1)
,
21