Table of Contents
Advertisement
9
Overview of machine software functions (firmware)
The table below provides information about the relevant functionality of the interface machine software
(firmware).
Machine
software
number
(firmware)
0.0.1.0
0.0.2.0
0.0.3.0
0.0.5.0
099-000769-EW501
29.06.2015
Overview of machine software functions (firmware)
Item number
Hardware
platform
042-00973-00000
042-00973-00001
042-00973-00001
Function
00
Initial version
00
Range of metallurgical pulsing extended to cover
50 Hz to 15 kHz. This function is only guaranteed if
01
the version of the Tetrix power source software is at
least 0.2.D.0.
With older software versions, it will be scaled
automatically for the range up to 2500 Hz.
02
superPuls and lift arc signals for Phoenix/alpha Q
power sources from version 0.6.5.0 and MM
tigSpeed ON signal for Tetrix/forceTig systems
Advanced JOB selection for MM systems
Optional control voltages for hot wire, oscillation or
filler wire down-slope value
Latched modes implemented for the operating mode
Tetrix / forceTig system
45
Advertisement
Table of Contents
Need help?
Do you have a question about the RINT X12 and is the answer not in the manual?
Questions and answers