Intended Use; Applications; Automation; Revision - EWM RINT X12 Operating Instructions Manual

Intended use

Applications

3 Intended use
Hazards due to improper usage!
Hazards may arise for persons, animals and material objects if the equipment is not
used correctly. No liability is accepted for any damages arising from improper usage!
•
The equipment must only be used in line with proper usage and by trained or expert staff!
•
Do not modify or convert the equipment improperly!
Damage due to the use of non-genuine parts!
The manufacturer's warranty becomes void if non-genuine parts are used!
•
Only use system components and options (power sources, welding torches, electrode
holders, remote controls, spare parts and replacement parts, etc.) from our range of
products!
•
Only insert and lock accessory components into the relevant connection socket when the
machine is switched off.
3.1 Applications
3.1.1

Automation

Automated, robot-controlled welding production with the digital robot power sources.
3.2

Revision

Revision Date
1.0 XX.XX.XXXX
1.1 01/03/2015
3.3

Use and operation solely with the following machines

RINT X12
8
WARNING
CAUTION
Change
Draft version
MAG, superPuls and lift arc signals, selection of advanced JOBs,
EWM Config function, latched modes,
Tetrix, additional control voltage, tigSpeed activation
WIG / TIG
Tetrix 352, 452, 552
Tetrix 352 AC/DC
Tetrix 352 AC/DC AW
Tetrix 352, 452, 552, 1002 AW
Tetrix 152, 352, 552 Plasma
Tetrix 152, 352, 552 Plasma AW
forceTig 352 AC/DC
forceTig 552, 1002
MIG / MAG
alpha Q 352, 552
Phoenix 352, 452, 552, 1002 RC
Phoenix 552 RC Tandem
alpha Q 352, 552 MM
Phoenix 352, 452, 552, 1002 MM
RC
Phoenix 552 MM Tandem
099-000769-EW501
29.06.2015