Cleaning The Ventilation Gaps; Cleaning The Door Seal; Cleaning The Compressor And Metal Grille At The Back Of The Appliance; Starting Up The Appliance After Cleaning - Miele FN 22062 ws Operating And Installation Instructions

Cleaning the ventilation gaps

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (e.g. use the
dusting brush for Miele vacuum
cleaners)

Cleaning the door seal

Do not use any grease or oil on the
door seal as these will cause the seal
to deteriorate and become porous
over time.
 The door seal should be cleaned reg-
ularly with clean water, and then
wiped dry with a soft cloth.
Cleaning and care
Cleaning the compressor and
metal grille at the back of the
appliance

When cleaning the compressor
and the grille, make sure that the
pipework and other components do
not get broken or damaged in any
way.
The compressor and metal grille at the
back of the appliance (heat exchanger)
should be dusted at least once a year. A
build-up of dust will increase the energy
consumption of the appliance.
Starting up the appliance after
cleaning
 Slide all shelves back into the appli-
ance.
 Reconnect to the mains and switch
the appliance back on.
 Switch on the Super freeze function
for a while so that the freezer section
can cool down quickly.
 Once the temperature in the freezer
has reached the required temperat-
ure, place the food back in the freezer
drawers and put them back in the
freezer. Then close the appliance
door.
 Switch off the Super freeze function
as soon as the temperature in the
freezer is a constant -18 °C or colder.
37