What to do if ...
Problem
Frost has accumulated
on the front panel of the
NoFrost module.
An LED indicator light is
flashing at the back of
the appliance at the
bottom near the com-
pressor (depending on
model).
40
Cause and remedy
This is not a fault. Condensation has settled on the
panel and frozen.
This could be due to:
– the appliance door being opened too often, or be-
ing left open.
– a large amount of food is being frozen at once.
– an increase in humidity levels in the room.
Keep the door closed as much as possible. The
NoFrost system will automatically defrost the layer
of ice over the next few days.
This is not a fault. The electronic unit for the com-
pressor is equipped with an operation and fault dia-
gnosis LED indicator light which flashes every 15
seconds (depending on model).