Cleaning The Door Seal; Cleaning The Ventilation Gaps; After Cleaning - Miele F 31202 Ui Operating And Installation Instructions

Hide thumbs Also See for F 31202 Ui:
Table of Contents

Advertisement

Cleaning and care

Cleaning the door seal

If the door seal is damaged or has
slipped out of its groove, the appli-
ance door may not close properly
and cooling performance will be re-
duced. As a result, condensate will
build up in the interior cabinet and
this can cause a build-up of ice.
Do not damage the door seal and
ensure it does not slip out of its
groove.
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
 The door seal should be cleaned reg-
ularly with clean water and then
wiped dry with a cloth.
36

Cleaning the ventilation gaps

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).

After cleaning

 Close the appliance door.
 Switch the refrigeration appliance
back on.
 Switch on the SuperFreeze function
so that the refrigeration appliance can
cool down quickly.
 Once the temperature in the refrigera-
tion appliance is sufficiently low,
place the frozen food back in the
freezer drawers and put them back in
the refrigeration appliance.
 Switch the SuperFreeze function off
again.

Advertisement

Table of Contents
loading

Table of Contents