Installation
Installation
Two people are required for in-
stalling the appliance.
The appliance must be empty
when it is installed.
Move the appliance carefully on
floors that are sensitive to scratching
to prevent damage.
For easier installation there are trans-
port handles on the back at the top
and transport wheels underneath the
appliance.
Prepare the appliance for installation
as close as possible to its intended
installation location.
Release the mains cable from the
back of the appliance.
Remove the cable clip from the back
of the appliance.
Move the appliance carefully to its in-
tended installation location.
Position the appliance with the wall
spacers (if used) or the back close to
the wall.
48
Aligning the appliance
To align the appliance, adjust the
front feet using the spanner supplied