Switching On And Off; Switching Off For Longer Periods Of Time - Miele FN 22062 ws Operating And Installation Instructions

Switching on and off

Switching on
To enable the temperature to get suffi-
ciently cold inside the appliance, allow
the appliance to run for approx.
2 hours before placing food in it.
Do not place food in the freezer until it
has reached the required coldness (at
least -18 °C).
 Press the  button.
The appliance will start to cool and the
temperature required will appear in the
temperature display. The temperature
display and the alarm symbol  will
flash at the same time until the required
temperature is reached.
Switching off
 Press the  button until the display
goes out.
If this is does not happen, the safety
lock is still activated (see "Selecting
further settings - To deactivate the
safety lock).
The cooling system will be switched off.
20
Switching off for longer peri-
ods of time

If, during a long absence, the ap-
pliance is switched off but not
cleaned and the door(s) left shut,
there is a danger of mould building
up inside the appliance.
It is essential to clean the appliance.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
 switch the appliance off,
 disconnect it from the mains,
 clean the appliance and
 leave the door(s) ajar to air the appli-
ance and avoid odours building up in-
side the appliance.