Selecting Further Settings; Settings Mode; Activating Or Deactivating The - Miele FN 22062 ws Operating And Installation Instructions

Settings mode

Certain settings on the appliance can
only be selected in settings mode.
To adjust the brightness of the
display

Activating or deactivating the

lock
Settings mode is indicated by the menu
symbol  in the display.
The procedure for accessing settings
mode and for changing settings is de-
scribed below.
To adjust the brightness of the dis-
play 
The display brightness can be adjusted
to suit lighting conditions in the room.
The brightness of the display can be
altered in 5 stages. The factory default
setting is level 1.
 Press the Super freeze button  for
approx. 5 seconds.
The  menu symbol lights up. Settings
mode is now active. The lock symbol 
flashes.
 Press the button for setting the tem-
perature  to access the display
brightness function.
The lock symbol  goes out and the
display brightness symbol  will start
flashing.
 Press the Super freeze button 
briefly to confirm your choice.
The brightness symbol  lights up.

Selecting further settings

 Press the button for setting the tem-
perature  repeatedly until the bright-
ness level you want is reached.
The more fields that are lit up in the

temperature display, the brighter the
display.

 Press the Super freeze button 
briefly to confirm your choice.
The brightness symbol  flashes. The
selected setting is now applied.
To quit settings mode:
 Press the On/Off button .
or
 wait 5 minutes.
The menu symbol  and the bright-
ness symbol  go out. The required
temperature appears in the display.
25