Advertisement
2. Handle
Cut the 8mm square shaft to an appropriate length. The shaft should stick out of the boltwork
5-8mm and will be secured by the star washer. Assemble the handle as shown below. Affix
the shaft in the handle with the provided screw and cover the screw with the label.
The spindle hole should be Ø: 11-13 mm.
Star Washer
DIMENSIONS:
M-LOCKS BV
Tel: +31 (0)314 376 876
Vlijtstraat 40
ver. 1.0 2010 05 26
Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem
2
www.m-locks.com
Advertisement
