Shooting still images
Perform "Getting Started" from step 1 to 5 beforehand (page 15).
The following operation is common with VIDEO mode and VR mode.
You can record still images and movies on the same disc.
Remove the lens cap by pressing both knobs on the sides of the cap.
Install the battery pack or connect the AC adaptor (page 15).
Open the LCD screen.
The image is not displayed in the viewfinder when the LCD screen opens.
Set the mode dial to
Turn the power on by pressing the POWER button for a few seconds.
Insert a disc (page 26).
This sets your camcorder to standby.