Changing the SETUP display
A. SHUT OFF
z 5 min
On DEMO MODE
•You cannot select [DEMO MODE] when a disc is inserted in your camcorder.
•When NIGHTSHOT PLUS switch is set to ON, the ["NIGHTSHOT PLUS"] indicator appears on
the LCD display and you cannot select [DEMO MODE] in the SETUP display.
•The following operations cancel the demonstration:
- When the mode dial is set to
- When you press SETUP.
- When the NIGHTSHOT PLUS switch is set to ON.
- When you slide the disc cover OPEN switch.
•When [DEMO MODE] default setting is standby, the demonstration starts about 10 minutes after
you have set the mode dial to
To cancel the demonstration, insert a disc, set the mode dial to
set [DEMO MODE] to [OFF]. To set the camcorder to standby again, leave the [DEMO MODE] at
[ON] in the menu settings, press the POWER button to OFF (CHG), and then return the POWER
button to ON and the mode dial to
To set the date or time (page 23).
To turn the power off automatically if no
operation have taken place for five minutes
when powered by the battery pack.
To remain the power on even if no operation
To display selected menu items in normal size.
To display selected menu items at twice the
To send data corresponding with the
To send data corresponding with USB 1.1 (full
To make the demonstration appear.
To cancel the demonstration mode.
(Movie) without a disc inserted.