Dubbing a disc to a tape
Dubbing to a tape
•Set [DISPLAY] in
the SETUP display (the default setting is
•Press the following buttons to make the
indicators disappear so that they will not be
superimposed on the edited tape:
– DISPLAY/BATT INFO
– DISPLAY on the Remote Commander
– DATA CODE on the Remote Commander
Insert the recorded disc into your
Prepare the VCR for recording.
Insert a blank tape (or a tape you want
to record over) into the VCR.
Set the input selector to LINE.
Refer to the operating instructions of the
Start recording on the VCR.
Play back the recorded disc on your
When you have finished dubbing
Stop recording on the VCR, then press x on
(OTHERS) to [LCD] in