Shooting movies
Perform "Getting Started" from step 1 to 5 beforehand (page 15).
The following operation is common with VIDEO mode and VR mode.
3
4
2
7
1
Remove the lens cap by pressing both knobs on the sides of the cap.
2
Install the battery pack or connect the AC adaptor (page 15).
3
Open the LCD screen.
The image is not displayed in the viewfinder when the LCD screen opens.
4
Set the mode dial to
5
Turn the power on by pressing the POWER button for a few seconds.
6
Insert a disc (page 26).
This sets your camcorder to standby.
6
1
5
(Movie).
STBY0:00:00
-R
VIDEO
Recording
lamp
29