Shooting Still Images - Sony Handycam DCR-DVD201E Operating Instructions Manual

Shooting still images

Perform "Getting Started" from step 1 to 5 beforehand (page 15 to 27).
The following operation is common with VIDEO mode and VR mode.
You can record still images and movies on the same disc.
3
4
2
5
1
Remove the lens cap by pressing both knobs on the sides of the cap.
2
Install the battery pack or connect the AC adaptor (page 15).
3
Open the LCD screen.
The image is not displayed in the viewfinder when the LCD screen opens.
4
Set the mode dial to
5
Turn the power on by pressing the POWER button for a few seconds.
6
Insert a disc (page 26).
This sets your camcorder to standby.
(Still).
FINE 0 -R
VIDEO
7 8
6
1