Knife Maintenance; Opening And Removal Of The Upper Chamber; Knife Removal From The Knife Holders - Farmi Forest Corporation CH380HF Operation, Maintenance And Spare Parts Manual

MAINTENANCE

KNIFE MAINTENANCE

Please refer to the safety instructions. The
chipping disc continues to rotate freely in
the manner of a flywheel after the power
take-off has been disconnected.
Use protective gloves when handling the
knives.
OPENING AND REMOVAL OF THE UPPER
CHAMBER
o Remove the M16 (3 pcs) locking screws.
o Turn the upper chamber onto its side.
o Lock the disc with the locking bolt.
o Remove the feed chute or turn it to the side.
Opening the upper chamber
CH380HF
KNIFE REMOVAL FROM
THE KNIFE HOLDERS
Locking the disc and removing the lock nuts
1. Remove the knife's lock nuts (M14).
2. Remove the knife fastening bolts (M14). Turn
the wrench carefully to avoid hand injury by
the knife should the wrench slip.
Removing the knife fastening bolts
28
Locking
bolt