Maintenance - Farmi Forest Corporation 100 Operation, Maintenance And Spare Parts Manual

MAINTENANCE

OBJECT
General
Check cylinders and
leakages in hoses
Drawbar eye
Drawbar joint Lubricate slide bearings
Hydraulic stee- Lubricate swing bearings
ring cylinder Check condition of pis-
ton rod and piston rod oil
scraper
Check condition of hoses
and couplings
Bearings of the
Lubricate slide bearings
floating bogie
Load backrest,
adjustable sets of
bolsters, tandem
bogie
Tires
Hubs
CHECKING TIRE PRESSURE
• Only use appropriate tools for checking and adjus-
ting tire pressure.
• Do not exceed the recommended maximum
pressure.
• Check tyre pressure.
400/60-15,5 14 PR 3,6 bar max.
FARMI 100
8 h,
or after working shift
ACTION
Maintenance interval, working hours
50 h,
or after working week
Check pins and lockings
Check fastening bolts
Lubricate axis of rotation
of the drawbar eye
Check torque of the
mounting screws
Check torque of the jour-
nal
Check journals and locks
Check journal lock for
correct seat
Check torque of bolts and
nuts
Check condition of tires,
torque of mounting sc-
rews and tire pressure
REPLACING HYDRAULIC HOSES
• When changing hydraulic hoses, clean the new
hoses, at least with compressed air.
• Check that the hoses are connected properly after
the change.
• If any hoses are removed for long periods of time,
protect the ports properly.
• Let the pump rotate slowly to bleed the air from
the system after changing hoses or components.
16
After 250 working hours or
once a year
Check the condition of
primary structures
Check cylinder bearings
Check condition of the slide
bearings
Check condition of the hub
bearings
Lubricate bearings
Check condition of the brake