Operation; Control Equipment - Farmi Forest Corporation CH380HF Operation, Maintenance And Spare Parts Manual

OPERATION

INSPECTION PRIOR TO USE
o Position the chipper on a level, hard
surface.
o Carry out the inspection with the tractor
engine switched off and the chipper disc
fully stopped.
o Check that the disc rotates freely and that
the chipper is free of any foreign objects.
o Check that all protective equipment is
in place and in good condition. Do not
remove any protective shields.
CAUTION!
Check the oil level of the hydraulic oil
reservoir. The oil level eyelet must be
covered.
o Check the tightness of the hydraulic pump
belt, see "Maintenance"
o Check the condition and tightness of
hoses and couplings.
CH380HF

CONTROL EQUIPMENT

The feed chute is operated from a remote
control panel either with a manual switch or foot
pedal.
1. STOP
2. FEED FORWARD = FF
3. REVERSE = REV
20
Feed rollers stop rotating.
(Right-hand foot pedal)
The feed rollers begin rotating inwards
and wood can be fed into the chipper.
(Left-hand foot pedal)
The feed rollers begin rotating outwards
and wood can be removed from the
rollers.The operating switch returns
automatically to the STOP position.
FEED CONTROL
ROLLER LIFT
HAND
NEUTRAL
LIFT
STOP
REV FF
NO STRESS
PROGRAMMING
PEDAL
PEDAL PLUG