Technical Information - Farmi Forest Corporation CH380HF Operation, Maintenance And Spare Parts Manual

TECHNICAL INFORMATION

INTRODUCTION
The Farmi CH380 is a 4-knived chipper desig-
ned for grapple loader feeding of up to 380 mm
diameter stems. The chip size can be adjusted
to suit its various end uses, such as biofuel,
industrial raw material, soil improvement or dry
litter.
The HF380 hydraulic feed chute facilitates pro-
cessing of difficult to feed materials. The feed
chute comes standard equipped with No Stress
revolution control, which shuts down the feed
when the output Rpm drops too low. The bene-
fits of the No Stress mechanism are:
• tractors of lower power rating can be used
• more homogenous chip quality
• higher chip yield
The CH380HF chipper has its own hydraulic
unit.
CH380HF
MAIN COMPONENTS
CH380
1. Upper chamber
2. Lower chamber
3. Disc
4. Knife
5. Vertical anvil
6. Horizontal anvil
7. Breaker
8. Discharge pipe
9. Feed chute frame
10. Feed chute
11. Roller swing
13