Eaton 91PS User And Installation Manual page 75

Eaton 91PS/93PS UPS 8-10 kW
Main menu
Statistics
Settings
7.1.4.1
The UPS has the following settings that are user-modifiable. In the Home
screen, select Settings.
Table 19: User settings
Setting
Information
About
To modify the Configuration settings, you need to sign in.
Table 20: Configuration settings
Setting
Language
Unit Name
Clock
Call Service
Signal Input
Relay Outputs
Battery test
Bypass Limits
Screen Saver Time-
out
Meters
Lamp Test
HMI backlight
Control P/W level 1
Control P/W level 2
Reset statistics
Minimum required
kVA
©
Eaton Corporation plc 2018. All rights reserved.
Submenu
UPS
Battery
User Configura-
tion Service
User settings
Description
Information on the UPS model, including part number and serial
number.
Version information.
Description
Change the user interface language.
Change the unit name.
Change the date and time, change the clock format or enable/
disable NTP clock setup.
Send automatic e-mail to the service center in case of a failure.
Select signal input name and function or change contact polarity.
Configure the relay outputs.
Change the power level and duration for battery test.
Change the bypass voltage or bypass frequency.
Change the screen saver timeout.
Change the meters format.
Enable the lamp test.
Adjust the backlight brightness.
Change the level 1 password, or remove the password on level 1.
The default value is 1111.
Change the level 2 password. The default value is 0101.
Reset all statistics.
Change the minimum required kVA.
Functions
A summary of UPS statistics
Details are not available.
Configurable user settings. For details, see Section
7.1.4.1
.
Revision: 003 Document ID: P-164000672
User's and installation guide
75 (102)