Eaton 91PS User And Installation Manual page 44

Eaton 91PS/93PS UPS 8-10 kW
5. If the leveling feet are not fully
retracted, turn them until they
are retracted.
6. Open the UPS front door.
7. Remove the bolts that fasten
the shipping brackets to the
UPS cabinet and to the pallet.
8. Remove the shipping brackets.
Note: After you have removed the shipping brackets, move the unit
immediately away from the pallet.
After you have removed the shipping brackets and retracted the leveling feet,
do not use a forklift to move the unit while it is still on the pallet. Note that the
UPS cabinet is heavy and there are casters under the cabinet.
©
Eaton Corporation plc 2018. All rights reserved. Revision: 003 Document ID: P-164000672
User's and installation guide
44 (102)