Eaton 91PS User And Installation Manual page 65

Eaton 91PS/93PS UPS 8-10 kW
Figure 23. Network Card - MS
• PX Gateway Card (only with 93PS (3:3) UPS)
Provides remote monitoring through a Web browser interface, e-mail, and a
network management system (NMS) using SNMP and connects to a twisted-
pair Ethernet (10/100BaseT) network. The card also provides direct
integration of UPS information (meters and status) to a Building
Management System (BMS) using the Modbus RTU and TCP protocols as
well as BACnet protocols.
Figure 24. PX Gateway Card
• Industrial Relay Card-MS
The MiniSlot Industrial Relay Card provides a way of connecting the 91PS/
93PS to industrial and electrical monitoring systems. It also enables a wide
range of control applications by allowing up to 250 volts and 8 Amperes
through its 5 relay connections. By connecting wires to the corresponding
places in its terminal blocks, you can choose Normally Open or Normally
Closed setup for each output.
For information on how to configure Industrial Relay Card-MS, see Section
6.5
.
©
Eaton Corporation plc 2018. All rights reserved. Revision: 003 Document ID: P-164000672
User's and installation guide
65 (102)