Driving; Moving Off - Zetor Z 8641 Supplement Operators Manual

MOVING OFF

1. Select road or reduced gears.
2. Depress the clutch pedal.
3. Move the main shifting lever and re-
versing lever to neutral position,
switch off the PTO switches on the
right column of the cab.
4. Start up the engine.
5. Adjust speed to 750-800/min
6. Move the reversing lever to the de-
sired driving direction (forward or
backward).
7. Select the desired moving off driving
gear.
8. Increase slightly the engine speed.
9. Grasp the hand brake lever.
10.Release the clutch pedal just up to
the point of drive engagement and
when increasing the engine speed,
continue in releasing of the clutch
pedal.
11.Release completely the hand brake.
12.Move off smoothly and slowly.
-1
Very fast moving off may cause over-
.
loading of the driving mechanism, in-
creased fuel consumption, excessive
wearing of tyres and damage to the load.
Moving off using the first gear should
only be used when driving with a heavy
trailer into slope and rough terrain.

DRIVING

F_02_36
11
When shifting individual gears (1-
4) or reverse (F-R), follow instruc-
tions given in this manual for
moving off and shifting. In case of
running engine and tractor in
standstill wait approximately 2
seconds after depressing the
clutch pedal and then engage the
desired gear or reverse.
When shifting in standstill, use
also the foot brake to increase
safety and prevent any unfore-
seen situations.