Module Of The Bracket With Ball Ø 80; Hitch Cbm For Single-Axle Trailers - Zetor Z 8641 Supplement Operators Manual

MODULE OF THE BRACKET WITH
BALL Ø 80
The bracket with ball ø 80 is used
for attaching of trailers with the
hitch device designed for balls
ø 80.
Unlocking of the hitch, see Fig. (A):
Move of the lever (1) in direction of the
arrow slides off the locking wedge (2).
Locking of the hitch, see Fig. (B):
Move of the lever (1) in direction of the
arrow slides in the locking wedge (2).
TRANSPORT USE
D207
HITCH CBM FOR SINGLE-AXLE
TRAILERS
The hitch for single-axle trailers can be
equipped with a hook (A) or swinging tow
bar (B).
Replacement of the hook of the swinging
tow bar (C):
1- Lower the hitch.
2- Unlock and remove the pin (1).
3- Remove the hook in direction of the
arrow.
Carry out installation of the swinging tow
bar in reverse order.
15
D208