History Hours-Of-Statistics-Kept - Cisco Nexus 7000 Series Command Reference Manual

history hours-of-statistics-kept

history hours-of-statistics-kept
To set the number of hours for which statistics are maintained for a Cisco NX-OS IP Service Level
Agreements (SLAs) operation, use the history hours-of-statistics-kept command. To return to the
default value, use the no form of this command.
Syntax Description
hours
Command Default
2 hours
Command Modes TCP connect configuration mode (config-ip-sla-tcp)
UDP echo configuration mode (config-ip-sla-udp)
UDP jitter configuration mode (config-ip-sla-jitter)
Command History Release
6.1(1)
Usage Guidelines
When the number of hours exceeds the specified value, the statistics table wraps (that is, the oldest
information is replaced by newer information).
This command does not require a license.
Examples
This example shows how to maintain 3 hours of statistics for an UDP echo operation:
switch(config)# ip sla 1
switch(config-ip-sla)# udp-echo 192.199.199.2 1
switch(config-ip-sla-udp)# history hours-of-statistics-kept 3
switch(config-ip-sla-udp)#
Related Commands Command
show ip sla auto group Displays the configuration including default values of IP SLAs auto-measure
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-12
history hours-of-statistics-kept hours
no history hours-of-statistics-kept
Hour group size value. The range is from 0 to 25 hours.
Modification
This command was introduced.
Description
groups.
Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03