Interface 116 - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
interface
To specify an interface type and number, use the interface command.
Syntax Description
type-number
Command Default None
Command Modes Interface configuration mode (config-if)
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to specify an interface type and number:
switch(config)# interface ethernet 0/0
switch(config-if)#
Related Commands Command
ip sla
ip sla responder udp
echo ipaddress
OL-27555-03
interface type-number
Slot number. The range is from 1 to 253.
Modification
This command was introduced.
Description
Begins the configuration for an IP SLAs operation and enters IP SLA
configuration mode.
Permanently enables the IP SLAs Responder functionality on a specified IP
address and port.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
interface
1-17