Next-Hop-Address - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands

next-hop-address

To specify match address of route or match packet, use the match ip address command. To return to the
default setting, use the no form of this command.
Syntax Description
access-list
Defaults None.
Command Modes Route-map configuration mode (config-route-map)
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples This example show how to specify match address of route or match packet:
switch(config)# route-map PBR
switch(config-route-map)# match ip address ACL
switch(config-ip-sla)#
Related Commands Command
filter-for-history
ip sla monitor
lives-of-history-kept
samples-of-history-kept
OL-27555-03
match ip address access-list
no match ip address access-list
IP access list name. The maximum size is 63 characters.
Modification
This command was introduced.
Description
Defines the type of information kept in the history table for the IP SLAs
operation.
Begins the configuration for an IP SLAs operation and enters IP SLA
monitor configuration mode.
Sets the number of lives maintained in the history table for the IP SLAs
operation.
Sets the number of entries kept in the history table per bucket for the IP
SLAs operation.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
next-hop-address
1-29