Harken POWERSEAT PWRS-G Instruction Manual page 31

powerseat pWrs-G.compact
5. Pass the primary rope inside the pins.
7. Make sure the rope has been fitted correctly
into its housing.
WARNING!
Take at least two turns of the rope around the winch drum, and if it slips under load increase the num-
ber of turns to a maximum of four, taking care not to overlap the rope.
NOTE!
The number of turns needed round the winch drum depends on the load and the condition of the
rope.
Check the device's descending capacity in its working configuration.
Before use ascend with the device, no more than 1 mtr (3,28 ft) and check, according to the de-
scent procedure 1, that it's descending smoothly.
In case of difficulties unwind the rope, and reduce the turns to not less than 2 wraps, until you have
the optimal configuration.
25-05-18
6. Pass the rope round the pulley.
8. Wind the rope clockwise around the winch
drum.
ENGLISH 31