Using The Compact Version Device - Harken POWERSEAT PWRS-G Instruction Manual

powerseat pWrs-G.compact
usInG the coMpAct versIon devIce - checkInG the coMpAct versIon devIce before use
Before and after using the PowerSeat Compact version follow the procedure described in the "Checking the Device
Before Use" paragraph.
usInG the coMpAct versIon devIce - prIMAry rope InstAllAtIon procedure on coMpAct versIon
1. Place the PowerSeat on the ground.
WARNING!
Slide the front tube correctly into its housing until the red reference mark is no longer visible.
3. Remove the strop from upper anchorage
point.
30
2. Pull open the clamp and slide the short tube
into the housing.
4. Fasten the strop on the lower anchorage
point.
ENGLISH 25-05-18