Adjusting The Control Lever Position - Harken POWERSEAT PWRS-G Instruction Manual

powerseat pWrs-G
usInG the devIce - AdjustInG the control lever posItIon
Before starting to use the device it is possbile to adjust the control lever position, so that it is ergonomically
comfortable for the operator, cosidering the intended use.
1. Loose the control lever screw.
2. Place the control lever on one of 3 possible
position.
usInG the devIce - prIMAry rope InstAllAtIon procedure
1. Place the PowerSeat on the ground.
25-05-18
2. Place the control lever on one of 3 possible
position.
3. Tighten the control lever screw.
2. Pull open the clamp and slide the front tube
into the housing.
ENGLISH 17