Adjusting The Accelerator Control Position - Harken POWERSEAT PWRS-G Instruction Manual

powerseat pWrs-G
Ispect the lever control screw, and all screws
that secure the seat to the frame and check
that they are properly tightened.
NOTE!
Before every use carry out a function check with the device unloaded to check for any problems with the engine.
usInG the devIce - AdjustInG the AccelerAtor control posItIon
Before using the device verify the position of the accelerator control so that it is ergonomically comfortable for
the operator, depending on the use that is expected.
1. Loose the screws of the accelerator control.
3. Tighten the screws that anchor the accelera-
tor control.
16
Rotate the winch drum clockwise by hand
and make sure that it cannot rotate
anticlockwise.
2. Place appropriately the accelerator control
position.
NOTE!
Verify that the accelerator control
is away from the engine exhaust.
ENGLISH 25-05-18