Descent Procedure 1 - Harken POWERSEAT PWRS-G Instruction Manual

powerseat pWrs-G
WARNING!
To use the PowerSeat in the fi xed point confi guration the primary rope under load must leave the winch
with a lateral and frontal angle of between ± 6°.
To the anchorage
WARNING!
Before using the device check that the rope is correctly installed.
usInG the devIce - descent procedure 1
1. Switch off the engine by moving the accel-
erator control to the " 0 " position.
NOTE!
If the accelerator control does not work, stop the engine by shutting off the carburettor air intake, moving
the air lever to the CLOSED position (see Engine Manual).
25-05-18
Max angle ±6°
Anchor point
ENGLISH
Maw angle ±6°
To the anchorage
2. With one hand grasp the rope leaving the
winch.
Anchor
point
25