Descent Procedure 2 - Harken POWERSEAT PWRS-G Instruction Manual

powerseat pWrs-G
3. With the other hand, turn the control lever
clockwise to allow the rope to slip on the winch
drum and permit a controlled descent. To adjust
descent speed, manually control the speed at
which the rope leaves the winch by holding
rope with arm out and bringing it in towards the
winch drum. To stop the descent, release the
control lever.
NOTE!
Take care not to overbalance when getting off the seat.
Lower the PowerSeat until the operator's feet are firmly on the ground, but the unit is still
suspended. Stand up and move on the seat. Now the device can be lowered to the ground and
released from the rope.
usInG the devIce - descent procedure 2
1. Switch off the engine by moving the accel-
erator control to the " 0 " position.
NOTE!
If the accelerator control does not work, stop the engine by shutting off the carburettor air intake, moving
the air lever to the CLOSED position (see Engine Manual).
26
To facilitate descent, a carabiner can be fixed to
the ring on the front tube and the primary rope
passed through it.
2. With one hand grasp the rope leaving the
winch.
ENGLISH 25-05-18