Table of Contents
Advertisement
powerseat pWrs-G
WARNING!
Keep your hands, feet and clothing etc away from the moving parts of the device.
WARNING!
During the ascent some parts of the engine could heat up. Handle the device with care to avoid injury.
WARNING!
During the use of the device any knots on the rope, if they are involved in the device circuit, may damage
the device and cause dangerous conditions.
For further information on the use of the engine consult the Engine Manual supplied together with this manual.
usInG the devIce - Ascent procedure 1
1. Install the primary rope on the device as indicated in the "Primary Rope Installation Procedure" paragraph
2. Sit on the device
3. Connect the fall arrest device to the harness as described in the "Preparing to Ascend" paragraph
4. Connect the waist strop to the two side attachment points of the harness, passing it outside the front tube
of the PowerSeat.
5. Connect the snap-hook provided with the device to the lower front attachment point of the harness.
25-05-18
1
2
3
4
5
Pos.
1
2
3
4
5
ENGLISH
Descrizione
Fall Arrest Device
Upper Front Attachment
Lower Front Attachment
Waist Strop
Side Attachment Point
21
Advertisement
Table of Contents
